TC Series
MODELTC-1640TC-1660TC-1840TC-1860
CapacityHeight of centers 205  mm (8.07") 231 mm (9.09")
Swing over bed Ø410 mm (16.14") Ø462 mm (18.18")
Swing in gap Ø620 mm (24.4") Ø652 mm (25.66")
Swing over cross slide Ø255 mm (10.04") Ø305 mm (12")
Distance between centers 1000 mm (40") 1500 mm (60") 1000 mm (40") 1500 mm (60")
Width of bed 305 mm (12")
Gap width in front faceplate 120 mm (4.72")
Headstock and
Main Spindle
Spindle nose D1-6 (std) / A2-6 (opt)
Spindle center sleeve Ø70 mm (2.76") Taper 1/19.18 MT x NO.4
Spindle bore Ø65 mm (2.55")
Spindle speed:
Gear steps / Range
12 steps / 36 ~ 1800 RPM
A 50 70 105
B 180 250 380
C 900 1200 1800
CarriageCross slide travel 250 mm (9.84") 260 mm (10.23") 250 mm (9.84") 260 mm (10.23")
Top slide travel 155 mm (6.1")
Threads and FeedsWhitworth threads: Kinds / Range 45 Kinds / 2 ~ 72 T.P.I.
Metric threads: Kinds / Range 39 Kinds / 0.2 ~ 14 mm
D.P. threads: Kinds / Range 21 Kinds / 8 ~ 44 D.P.
M.P. threads: Kinds / Range 18 Kinds / 0.3 ~ 3.5 M.P.
Longitudinal feeds 0.04 ~ 1.0 mm (0.0015" ~ 0.04")
Cross feeds 0.02 ~ 0.5 mm (0.00075"~ 0.02")
TailstockQuill diameter Ø59 mm (2.322")
Quill travel 127 mm (5")
Taper of center MT No. 4
MotorMain spindle 5 HP (3.75 kW)
Forced lubrication for headstock --
Coolant pump 1/8 HP (0.09375 kW)
MeasurementWeight ApproxNET 1600 kgs 1750 kgs 1650 kgs 1800 kgs
GROSS 1800 kgs 2000 kgs 1850 kgs 2050 kgs
Packing sizeLength 2400 mm 2900 mm 2400 mm 2900 mm
Width x Height Width 1120 (44.1") x Height 1900 mm (74.8")

Specifications subject to change without notice.

Standard Accessories:

  • Backplate for 9" chuck
  • Dead center MT.4
  • Dead center MT.4 with carbide tip
  • Spindle center sleeve MT.6
  • Level pads......6 pcs
  • Tool set & Box
  • Operation manual & parts list
  • Full length splash guard
  • Halogen lamp

Optional Accessories:

3-Jaws scroll 9" chuck
4-Jaws independent 10" chuck

Driving plate with dog

Chuck Safety Guards

Electrical system for CE

Faceplate 12"

Digital read out system

Carriage micro stop set

Drill chuck & arbor

Rotating center MT.4

Taper turning attachment

Steady rest w/ball bearing

Follow rest w/bronze tip

Quick change tool post

Protect cover on leadscrew for CE

  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HRC 48 - 55.
  • Turcite B coating between the bed and carriage.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Built-in coolant pump & fitting provided.
  • Wider bed way which give absorbs vibration.
gotop
I agree