CNC Lathe

CNE Series

CNE - 20 / 26 Slant Bed Lathe

Photo shown model : CNE-20

Slant Bed CNC Lathe CNE -20

Optimum Structural Design A New Definition for Rigidity and Stability

With years of efforts of research and development, the Shun Chuan's slant bed CNC lathe will offer the unique rigidity. The design concept behind the CNE-20 / CNE-26 series is to enhance heavy duty, precision and stability. With its excellent machine structure, you can handle heavy cutting with more ease than ever before.

Complete Oil Fluid Separation

  • In addition to the oil fluid separation design on X- and Z-axes, the cutting fluid tank is specially designed with a labyrinth construction to fully exhaust the floating oil.
  • This assures no oil in the cutting fluid. Double filters in the fluid tank to ensure a clean recirculated fluid.

Programmable Tailstock

  • The ruggedly constructed, programmable tailstock and quill movement can be controlled on the control panel for easy set-up and accurate positioning.
  • Tailstock movement is driven by turret slide.

Tool Pre-Setter

  • The tool pre-setter effectively reduces cutting tests while saving machining time.
  • The mechanism is used for measuring the tool diameter and length.
  • The tool adjustment arm is powered and program controlled.

Powerful Spindle Drive

  • The spindle is driven by a powerful motor, providing great horsepower output for heavy duty machining.


  • CNC controller: FANUC 0i - TC
  • Boring bar holder........2sets.
  • O.D./facing tool holder....2sets.
  • U drill holder...................1set.
  • Boring socket : For H10....
    * O12/O16/O20/O25/O32...1piece for each
    * Drilling socket MT.3 x O40....1piece
  • Boring socket : For H12....
    * O12/O16/O20/O25....1piece for each
    * Drilling socket MT.2 xO32....1piece
  • Chip conveyor & chip bucket cart.
  • Pedal switch for chuck open & close.
  • Hydraulic hollow chuck with rotary cylinder.
  • Programmable tailstock with hydraulic clamp system.
  • Hydraulic system with tank for power chuck, turret & tailstock quill.
  • Work light.
  • Coolant system.
  • Heat exchanger.
  • Rotating center MT.4......1set
  • Machining finishing lamp.
  • Auto lubrication system.
  • Level pads .....6pcs.
  • Toolset & box.
  • Operation manual.
  • Maintenance manual.


  • Auto door.
  • Transformer.
  • Collet chuck.
  • Parts catcher.
  • Auto tool pre-setter.
  • CE configuration.
  • Auto bar feeder w/interface.
  • Air blow system
  • VDI 30 x 12 tools / ?? 20mm electronic type turret.
  • Cs axis control & function with break system / VDI 30 revolving tool turret.
Capacity No. of control axis 2 Axis
Swing over bed O630mm (24.8")
Standard turning diameter H10....O230mm (9.05") / H12....O300mm (11.81")
Maximum turning diameter H10....O300mm (11.81") / H12....O340mm (13.38")
Work length 600mm (23.62") 580mm (22.83")
and Main Spindle
Spindle nose, internal taper A2-6, O69 Taper 1/20 A2-6, O81 Taper 1/20
Spindle bore O65mm (2.56") O78mm (3.07")
Bar capacity O52mm (2.04") O65mm (2.56")
Hydraulic power chuck O210mm (8") O254mm (10")
Range of spindle speed 45-4500 R.P.M. 35-3500 R.P.M.
Front bearing ID. of spindle O100mm (3.937") O120mm (4.724")
Cross Slide
and Carriage
Cross slide travel (X-axis) H10....O190mm (7.48") / H12....O207mm (8.15")
Longitudinal travel (Z-axis) 610mm (24") 590mm (23.23")
AC servo motor ( X-axis ) 1.6kW 8N.m ~ FANUC ?\8B/3000i
AC servo motor ( Z-axis ) 3.0kW 12N.m ~ FANUC ?\12B/3000i
Dia. of ball screw ( X-axis) O32mm (1.26") P5 C3
Dia. of ball screw ( Z-axis ) O40mm (1.57") P10 C3
Rapid traverse speed ( X-axis ) 15m/min (590 ipm)
Rapid traverse speed ( Z-axis ) 20m/min (787 ipm)
Cutting feed rate (Both axis) 0.001-500mm/rev.
Turret Tool station (Random) H10....10 tools / H 12....12 tools
Size of external turning tool H10....??25mm / H12....??20mm
Boring bar diameter H10....O40mm(1.575") / H12....O32mm(1.26")
Tailstock Quill diameter O85mm (3.346")
Quill travel 120mm (4.72")
Taper of center MT. No.4
Tailstock travel 550mm (21.65")
Motor Main spindle (continuous rated) STD. AC9kW (12HP) OPT. AC11kW (15HP) STD. AC11kW (15HP) OPT. AC15kW (20HP)
Main spindle (30 min. rated) STD. AC11kW (15HP) OPT. AC15kW (20HP) STD. AC15kW (20HP) OPT. AC18.5kW (25HP)
Hydraulic oil pump 2.2 kW (3HP)
Coolant pump 375W (0.5HP)
Tank Capacity Hydraulic tank 65 Litre (14.3 gal.)
Coolant tank 180 Litre(39.6 gal.)
Measurements Weight ( Net / Gross ) Approx. 5200kgs/5700kgs 5500kgs/6000kgs
Packing sizes Length 400mm (157.5")
Width x Height Width 1890mm(74.41") x Height 2230mm(87.8")

Specifications subject to change without notice.


(Hydraulic turret 12 station, Tool holder O32, Tool shank ??20) Unit:mm


(Hydraulic turret 10 station, Tool holder O40, Tool shank ??25) Unit:mm


(A2-6 Spindle nose, Bar capacity O52, N-208A6 power chuck) Unit:mm