MENU
PERODUCT LIST

Manual Lathe

ERL Series

ERL - 1330 / 1340
ERL - 1330V / 1340V

All models with oil bathed lubrication system to headstock
All models meet CE. (on request)
All models with 40mm (1.57") spindle bore, ASA D1-4

High Speed Precision Lathe ERL-1340 w/protect cover on leadscrew
  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HS-70.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Built-in coolant pump & fitting provided.
  • CSS (constant surface speed control) on request for E.V.S. model
  • Wider bed way which give absorbs vibration.

HEADSTOCK

  • Housing is vibration-absorbent, deflection-free.
  • Gears are hardened & MAAG or REISHAUER ground.

GEAR BOX

  • Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.

APRON

  • R/H or L/H wheel can be available on request.
  • Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds.

CARRIAGE & SLIDE

  • Anti-Float design backlash eliminator.
  • fitted in cross slide nut.
  • Safety clutch at feed shaft.
  • One shot lubrication in carriage & top slide.
  • Dual dials supply inch system screw.
  • Metric dial supply metric system only.
 

SAFETY FEATURES

  • Nylon safety gears in end train.
  • Shear pin in leadscrew.

HEAVY DUTY SPINDLE.

  • Machined from forged alloy steel, hardened ground & dynamically balanced.
  • Two point support by high grade precision, machine tool taper roller.

STANDARD ACCESSORIES:

  • Backplate for 7" chuck
  • Dead center MT.3
  • Dead center MT.3 with carbide tip
  • Spindle center sleeve MT.5
  • Level pads......6 pcs
  • Tool set & Box
  • Operation manual & parts list

OPTIONAL ACCESSORIES:

  • 3-Jaws scroll 7" chuck
  • 4-Jaws independent 8" chuck
  • 5C collet closer attachment
  • 5C collets (metric or inch)
  • Driving plate with dog
  • Chuck safety guard
  • Hydraulic copying attachment
  • Tool post grinder attachment
  • Taper turning attachment
  • Electrical system for CE
  • Protect cover on leadscrew for CE
  • Steady rest w/ball bearing
  • Follow rest w/bronze tip
  • Faceplate 12"
  • Drill chuck & arbor
  • Rotating center MT.3
  • Halogen lamp
  • Quick change tool post
  • Carriage micro stop set
  • Digital read out system
  • Full length splash guard
MODEL ERL-1330 ERL-1340 ERL-1330V ERL-1340V
Capacity Height of centers 171mm (6.73")
Swing over bed O342mm (13.46")
Swing in gap - o512mm (20??) - o512mm (20??)
Swing over cross slide O205mm (8.07")
Distance between centers 760mm (30") 1000mm (40") 760mm (30") 1000mm (40")
Width of bed 230mm (9")
Gap width in front faceplate 150mm (5")
Headstock and
Main Spindle
Spindle nose, internal taper D1-4, MT. No.5
Spindle center sleeve MT. No.5 x MT. No.3
Spindle bore O40mm (1.57??)
Spindle speed:
Gear steps / Range
8 steps / 80~2000 R.P.M. 2 steps / L 100~500 R.P.M.
  H 500~3000 R.P.M.
OPT.  
16 stepts / 4P 50~1350 R.P.M.  
2P 100~2570 R.P.M. Infinitely variable
Carriage Length on bed / Width of carriage 400mm (15.748??) / 384mm (15.118??)
Cross slide travel 180mm (7??)
Top slide travel 95mm (3.74)
Threads and Feeds Whitworth threads: Kinds / Range 45 kinds / 2~72 T.P.I.
Metric threads: Kinds / Range 39 kinds / 0.2~14 mm
D.P. threads: Kinds / Range 21 kinds / 8~44 D.P.
M.P. threads: Kinds / Range 18 kinds / 0.3~3.5 M.P.
Longitudinal feeds 0.05~1.7 (0.002??~0.067??)
Cross feeds 0.025~0.85 (0.001??~0.034??)
Tailstock Quill diameter O50mm (1.968??)
Quill travel 112 mm (4.5??)
Taper of center MT. No.3
Motor Main spindle OPT. 5HP 2P/ 2.5HP 4P AC 2.2kW (3HP), Inverter
Coolant pump 1/8 HP
Measurement Weight (Net / Gross) Approx. 850 / 950kgs 1000 / 1120kgs 850 / 950kgs 1000 / 1120kgs
Packing sizes Length 2000mm (78.8") 2270mm (89.4") 2000mm (78.8") 2270mm (89.4")
Width x Height Width 965mm (38??) x Height 1900mm (74.8??)

Specifications subject to change without notice.

MENU

MAIN PRODUCTS