MENU
PERODUCT LIST

Manual Lathe

ML Series

ML - 1740 / 1760 / 2040 / 2060
ML - 1740V / 1760V / 2040V / 2060V

E.V.S models with auto lubrication system to headstock & external tank for cooling the oil
All models with one piece solid stand
All models with universal feed gearbox & reversable apron
All models meet CE. (on request)
All models with 80mm (3.149") spindle bore, ASA D1-6
All models cross slide is hardened and ground to prolong operation life

High Speed Precision Lathe ML-2040
  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HS-70.
  • Turcite B coating between the bed and carriage.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Built-in coolant pump & fitting provided.
  • CSS (constant surface speed control) on request for E.V.S. model
  • Wider bed way which give absorbs vibration.

HEADSTOCK

  • Housing is vibration-absorbent, deflection-free.
  • Gears are hardened & MAAG or REISHAUER ground.

GEAR BOX

  • Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.

APRON

  • R/H or L/H wheel can be available on request.
  • Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds.

CARRIAGE & SLIDE

  • Anti-Float design backlash eliminator fitted in cross slide nut.
  • Safety clutch at feed shaft.
  • Oneshot lubrication in carriage & top slide.
  • Dual dials supply inchsystem screw.
  • Metric dial supply metric system only.
 

SAFETY FEATURES

  • Nylon safety gears in end train.
  • Shear pin in leadscrew.

STANDARD ACCESSORIES:

  • Backplate for 10" chuck
  • Dead center MT.5
  • Dead center MT.4 with carbide tip
  • Spindle center sleeve........O85mm Taper 1/19.18
  • Level pads......6 pcs
  • Tool set & Box
  • Operation manual & parts list

OPTIONAL ACCESSORIES:

  • 3-Jaws scroll 10" chuck
  • 4-Jaws independent 10" chuck
  • 5C collet closer attachment
  • 5C collets (metric or inch)
  • Driving plate with dog
  • Chuck safety guard
  • Hydraulic copying attachment
  • Tool post grinder attachment
  • Taper turning attachment
  • Electrical system for CE
  • Protect cover on leadscrew for CE
  • Steady rest w/ball bearing
  • Follow rest w/bronze tip
  • Faceplate 12"
  • Drill chuck & arbor
  • Rotating center MT.4
  • Halogen lamp
  • Quick change tool post
  • Carriage micro stop set
  • Digital read out system
  • Full length splash guard
MODEL ML-1740 ML-1760 ML-2040 ML-2060 ML-1740V ML-1760V ML-2040V ML-2060V
Capacity Height of centers 216mm (8.5") 254mm (10") 216mm (8.5") 254mm (10")
Swing over bed O432mm (17") O508mm (20") O432mm (17") O508mm (20")
Swing in gap O622mm (24.48") O698mm (27.48") O622mm (24.48") O698mm (27.48")
Swing over cross slide O277mm (10.9") O353mm (13.89") O277mm (10.9") O353mm (13.89")
Distance between centers 1000mm (40") 1500mm (60") 1000mm (40") 1500mm (60") 1000mm (40") 1500mm (60") 1000mm (40") 1500mm (60")
Width of bed 305mm (12")
Gap width in front faceplate 195mm (7.67")
Headstock and
Main Spindle
Spindle nose, internal taper D1-6 / A1-6 (opt.), o85mm Taper 1/19.18
Spindle center sleeve O85mm Taper 1/19.18 x MT. No.5
Spindle bore O80mm (3.149")
Spindle speed:
Gear steps / Range
12 steps / 36~1800 R.P.M. 3 steps /
A     36 50 70 105 L 30~125 R.P.M.
B    130 180 250 380 M 125~450 R.P.M.
C    620 900 1200 1800 H 450~2200 R.P.M.
  Innitely variable
Carriage Length on bed / Width of carriage 440mm (17.32") / 477mm (18.77")
Cross slide travel 235mm (9.25") 272mm (10.7") 235mm (9.25") 272mm (10.7")
Top slide travel 155mm (6.1")
Threads and Feeds Whitworth threads: Kinds / Range 45 Kinds / 2~72 T.P.I.
Metric threads: Kinds / Range 39 Kinds / 0.2~14 mm
D.P. threads: Kinds / Range 21 Kinds / 8~44 D.P.
M.P. threads: Kinds / Range 18 Kinds / 0.3~3.5 M.P.
Longitudinal feeds 0.04~1.0 (0.0015"~0.04")
Cross feeds 0.02~0.5 (0.00075"~0.02")
Tailstock Quill diameter O59mm (2.322")
Quill travel 127 mm (5")
Taper of center MT. No.4
Motor Main spindle 7.5HP AC 5.5kW (7.5HP), Inverter
Forced lubrication for HD. -- 1/4HP
Coolant pump 1/8HP
Measurement Weight (Net / Gross) Approx. 1700kgs 1840kgs 1850kgs 2010kgs 1750kgs 1890kgs 1900kgs 2060kgs 1700kgs 1840kgs 1850kgs 2010kgs 1750kgs 1890kgs 1900kgs 2060kgs
Packing sizes Length 2400mm (94.5") 2900mm (114.2") 2400mm (94.5") 2900mm (114.2") 2400mm (94.5") 2900mm (114.2") 2400mm (94.5") 2900mm (114.2")
Width x Height Width 1155mm (45.5") x Height 1900mm (74.8")

Specifications subject to change without notice.

MENU

MAIN PRODUCTS