BHL - 1550
BHL - 1550V
All models with mechanical clutch. (excluded E.V.S. model)
All models with auto lubrication system to headstock & external tank for cooling the oil
All models meet CE. (on request)
All models with 56mm (2.2") spindle bore, ASA D1-6
- All castings are properly stabilized and stress relieved.
- Bed ways are hardened & ground to min. HS-70.
- Turcite B coating between the bed and carriage.
- Extremely low noise level.
- Foot brake pedal provided.
- Built-in coolant pump & fitting provided.
- CSS (constant surface speed control) on request for E.V.S. model
- Wider bed way which give absorbs vibration.
- Oil sight window for efficient check of oil level action.
- Pressure lubrication system in headstock can ensure it's lubricated and cooling when high speed cutting.
- Splash lubricationin feed gearbox & apron.
- Housing is vibration-absorbent, deflection-free.
- Gears are hardened & MAAG or REISHAUER ground.
- Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.
- R/H or L/H wheel can be available on request.
- Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds.
HEAVY DUTY SPINDLE
- Machined from forged alloy steel, hardened ground & dynamically balanced.
- Three point support by high grade precision, machine tool taper roller & ball bearings.
- Backplate for 9" chuck
- Dead center MT.4
- Dead center MT.4 with carbide tip
- Spindle center sleeve MT.6
- Level pads......8 pcs
- Tool set & Box
- Operation manual & parts list
- 3-Jaws scroll 9" chuck
- 4-Jaws independent 10" chuck
- 5C collet closer attachment
- 5C collets (metric or inch)
- Driving plate with dog
- Chuck safety guard
- Hydraulic copying attachment
- Tool post grinder attachment
- Taper turning attachment
- Electrical system for CE
- Protect cover on leadscrew for CE
- Steady rest w/ball bearing
- Follow rest w/bronze tip
- Faceplate 12"
- Drill chuck & arbor
- Rotating center MT.4
- Halogen lamp
- Quick change tool post
- Carriage micro stop set
- Digital read out system
- Full length splash guard
|Capacity||Height of centers||190mm (7.48")|
|Swing over bed||O380mm (14.96")|
|Swing in gap||O610mm (24")|
|Swing over cross slide||O238mm (9.37")|
|Distance between centers||1250mm (50")|
|Width of bed||280mm (11")|
|Gap width in front faceplate||265mm (10.43")|
|Spindle nose, internal taper||D1-6, MT. No.6|
|Spindle center sleeve||MT. No.6 x MT. No.4|
|Spindle bore||O56mm (2.2")|
Gear steps / Range
|16 steps / 25~2000 R.P.M.||4 steps /|
|Disc clutch for Forward / Reverse||Innitely variable|
|Carriage||Length on bed / Width of carriage||484mm (19.05") / 450mm (17.71")|
|Cross slide travel||235mm (9.25")|
|Top slide travel||122mm (4.8")|
|Threads and Feeds||Whitworth threads: Kinds / Range||45 Kinds / 2~72 T.P.I.|
|Metric threads: Kinds / Range||39 Kinds / 0.2~14 mm|
|D.P. threads: Kinds / Range||21 Kinds / 8~44 D.P.|
|M.P. threads: Kinds / Range||18 Kinds / 0.3~3.5 M.P.|
|Longitudinal feeds||0.04~1.0 (0.0015"~0.04")|
|Cross feeds||0.02~0.5 (0.00075"~0.02")|
|Tailstock||Quill diameter||O59mm (2.322")|
|Quill travel||127 mm (5")|
|Taper of center||MT. No.4|
|Motor||Main spindle||7.5HP||AC 5.5kW (7.5HP), Inverter|
|Forced lubrication for HD.||--||1/4 HP|
|Coolant pump||1/8 HP|
|Measurement||Weight (Net / Gross) Approx.||1450kgs / 1610kgs|
|Packing size||Length||2580mm (101.58")|
|Width x Height||Width 1120mm (44.1") x Height 1900mm (74.8??)|
Specifications subject to change without notice.